xFusion 2288H V7 (RH2288H V7) Server: Specs, Features and Best-Fit Workloads Explained

The xFusion 2288H V7 — also listed in channel documentation as the RH2288H V7 — is a new-generation 2U, dual-socket rack server from xFusion Digital Technologies, the server specialist spun out of Huawei. Built on 4th and 5th Generation Intel Xeon Scalable processors with DDR5 memory, PCIe 5.0 expansion and CXL-based memory scaling, it targets software-defined storage, virtualization, VDI, database, CDN and AI inference workloads. This guide walks through the full 2288H V7 specification set, the platform features that differentiate it from other 2U servers, and the workloads where it delivers the strongest return.

What Is the xFusion 2288H V7?

xFusion (超聚变) was established in 2021 from Huawei’s server business and continues the FusionServer product line. The 2288H V7 is the flagship general-purpose 2U model in that lineup — the successor to the widely deployed 2288H V6 — and is positioned as a workhorse for enterprise and telecom-grade applications. The “RH2288H V7” designation seen in partner quoting tools refers to the same machine; xFusion’s official materials brand it as the FusionServer 2288H V7.

FusionServer 2288H V7 Specifications

Item	Specification
Form factor	2U rack server
Processors	1 or 2 x 4th/5th Gen Intel Xeon Scalable, TDP up to 385 W per processor; supports Hygon and Kunpeng alternatives in select markets
Chipset	Intel Emmitsburg PCH
Memory	32 x DDR5 DIMM slots up to 5600 MT/s; expandable to 48 DIMM slots (adding 16) via CXL memory expansion
Local storage	8-33 x 2.5-inch SAS/SATA/SSD, 12-18 x 3.5-inch SAS/SATA, 4/8/16/24 x NVMe SSD; up to 45 x 2.5-inch drives or 28 x all-NVMe; 2 x M.2 with hardware RAID for boot
RAID	RAID 0/1/10/1E/5/50/6/60, supercapacitor cache protection, RAID-level migration, drive roaming, remote web configuration
Network	OCP 3.0 NICs, 2 x FlexIO card slots, hot-swappable, PCIe 5.0
PCIe expansion	Up to 19 PCIe slots: 2 FlexIO (OCP 3.0) + 17 standard slots, 8 of them PCIe 5.0
GPU support	Up to 4 dual-width or 14 single-width GPU cards
Fans	4 hot-swappable counter-rotating fans, N+1 redundancy
Power	900 W / 1200 W / 1500 W / 2000 W / 3000 W Platinum or Titanium hot-swap PSUs, 1+1 redundancy
Management	iBMC with dedicated GE port, Redfish, SNMP, IPMI 2.0, HTML5/VNC remote KVM, out-of-band management
Typical workloads	SDS, VDI, CDN, virtualization, big data, database, cloud, AI inference, SMB, OA, web applications

What Makes the 2288H V7 Different

DDR5 today, CXL memory scaling tomorrow

The base configuration carries 32 DDR5 DIMM slots at up to 5600 MT/s — a doubling of per-DIMM bandwidth over the DDR4-based V6 generation. What sets the platform apart is CXL: the chassis accepts 16 additional DDR5 DIMMs through CXL expansion, reaching 48 memory slots in total. That headroom matters for in-memory databases, large VDI pools and big-data nodes where capacity, not compute, is the binding constraint.

Storage flexibility few 2U chassis can match

The 2288H V7 offers the widest drive matrix in its class: 8 to 33 x 2.5-inch SAS/SATA bays, 12 to 18 x 3.5-inch bays, or NVMe options from 4 up to 24 drives — scaling to 45 x 2.5-inch drives or a full 28-drive NVMe configuration. A dedicated 2 x M.2 hardware-RAID boot subsystem keeps the OS separated from data volumes, and the RAID stack ships with supercapacitor cache protection, level migration and drive roaming as standard.

PCIe 5.0 where it counts, expansion everywhere else

Seventeen standard PCIe slots (eight at Gen5) plus two hot-swappable FlexIO slots for OCP 3.0 NICs give the platform room for high-speed networking, HBAs and accelerators without sacrificing drive bays. GPU options reach four dual-width or fourteen single-width cards, covering inference, VDI graphics and transcoding workloads.

Reliability engineering you can point to

Three vendor-validated claims anchor the reliability story: heat-pipe remote heat dissipation that improves thermal performance by around 50% over a single heatsink, an AI-driven memory fault self-healing feature that cuts system downtime by 66%, and N+1 counter-rotating fans for graceful thermal degradation.

Energy efficiency as a design goal

xFusion quotes up to 8% lower total power consumption than the industry average, driven by fan/CPU power optimization algorithms, service-aware dynamic frequency adjustment and a power conversion design with 12.5% lower power loss. For large fleets, that translates directly into lower PUE and OPEX.

Intelligent operations with iBMC

The integrated iBMC provides a dedicated management GE port with Redfish, SNMP and IPMI 2.0 interfaces, plus an HTML5/VNC remote KVM. xFusion’s tooling automates firmware push (claimed 20x faster upgrades), reduces deployment steps by 75%, and delivers 100% asset-inventory accuracy — including takeover of third-party vendors’ servers, which simplifies heterogeneous data center management.

2288H V7 vs Dell PowerEdge R760 at a Glance

For buyers comparing the two most common 2U contenders:

Feature	xFusion 2288H V7	Dell PowerEdge R760
Processors	2 x 4th/5th Gen Xeon, up to 385 W	2 x 4th/5th Gen Xeon, up to 350 W+
Memory	32 DDR5 slots, CXL to 48	32 DDR5 slots
Max drives	Up to 45 x 2.5″ or 28 NVMe	Up to 24 x 2.5″ + rear bays
PCIe	Up to 19 slots (8 x Gen5)	Up to 8 slots
GPUs	4 dual-width / 14 single-width	2 double-width / 6 single-width
Management	iBMC (Redfish/IPMI 2.0)	iDRAC9 (Redfish)

The 2288H V7 wins on expansion density — more memory slots via CXL, more drives, more PCIe lanes and more GPU capacity per 2U. The R760 wins on global service coverage and the breadth of its certified ecosystem. The right choice depends on region, service expectations and supply-chain strategy rather than raw specifications alone.

Best-Fit Workloads

• Software-defined storage and scale-out storage clusters

• Server virtualization and VDI consolidation

• CDN edge nodes and web/application serving

• Relational databases and big data platforms

• Private and hybrid cloud building blocks

• AI inference and media transcoding with GPU acceleration

• SMB and mid-market general-purpose computing

Frequently Asked Questions

Is RH2288H V7 the same as FusionServer 2288H V7? Yes. RH2288H V7 is the SKU designation used in channel quoting and partner documentation, while FusionServer 2288H V7 is the official product name. The hardware is identical.

How much memory does the 2288H V7 support? The base platform has 32 DDR5 DIMM slots at up to 5600 MT/s. With CXL memory expansion, 16 additional DDR5 DIMMs can be added for a total of 48 memory slots.

How many drives can the 2288H V7 hold? Depending on the backplane configuration: 8 to 33 x 2.5-inch SAS/SATA drives, 12 to 18 x 3.5-inch drives, or 4 to 24 NVMe SSDs — scaling up to 45 x 2.5-inch drives or 28 all-NVMe drives, plus 2 x M.2 boot SSDs.

Can the 2288H V7 be used for AI? Yes. It supports up to four dual-width or fourteen single-width GPU cards, making it suitable for AI inference, VDI graphics and transcoding. For large-scale training, xFusion’s GPU-dedicated models are a better fit.

What management tools does it include? The integrated iBMC provides out-of-band management with Redfish, SNMP and IPMI 2.0, HTML5/VNC remote KVM, automated firmware upgrades and asset tracking across multi-vendor fleets.