Server Resellers
Dell PowerEdge R660 – Specifications & Operating Environment
1. Specifications
- Form Factor: 1U Rack Server
- Processor: 2× 4th/5th Gen Intel Xeon Scalable
- Memory: Up to 32× DDR5 DIMMs, max 8TB
- Storage: Up to 10× 2.5″ SAS/SATA/NVMe + 2× rear drives
- Expansion: PCIe Gen5, OCP 3.0 networking
- Power: Dual hot-plug redundant PSU
- Management: iDRAC9 Enterprise
- Ports: 10GbE/25GbE flexible network options
2. Operating Environment
- Operating Temperature: 10°C – 35°C
- Operating Humidity: 10% – 80% (non-condensing)
- Operating Altitude: Up to 3000m
- Power Input: 100–240V AC, 50/60Hz
- Cooling: Server rack forced air cooling
- Deployment: Data center, server room, cloud infrastructure
|
Model
|
|
|
Form Factor
|
|
|
Maxim Processor
|
Up to two 4th Generation Intel Xeon Scalable processors, with up to 56 cores and optional Intel® QuickAssist Technology
|
|
RAM
|
• 32 DDR5 DIMM slots, supports RDIMM 8 TB max, speeds up to 4800 MT/s
• Supports registered ECC DDR5 DIMMs only |
|
Hard disk
|
Front bays:
• Up to 10 x 2.5-inch, SAS/SATA/NVMe (HDD/SSD) max 153.6 TB • Up to 8 x 2.5-inch, SAS/SATA/NVMe, (HDD/SSD) max 122.88 TB Rear bays: • Up to 2 x 2.5-inch, SAS/SATA/NVMe, max 30.72 TB |
|
Storage controllers
|
• Internal Controllers (RAID): PERC H965i, PERC H755, PERC H755N, PERC H355, HBA355i
• Internal Boot: Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSD drives, or USB • External HBAs (non-RAID): HBA355e • Software RAID: S160 |
|
Power Supply
|
• 1800W Titanium 200—240 VAC or 240 HVDC, hot swap with full redundant
• 1400W Platinum 100—240 VAC or 240 HVDC, hot swap with full redundant • 1100W Titanium 100—240 VAC or 240 HVDC, hot swap with full redundant |
|
Fans
|
• Standard (STD) fans/High performance Gold (VHP) fans
• Up to 4 sets (dual fan module) hot plug fans |
|
Dimensions
|
• Height – 42.8 mm (1.68 inches)
• Width – 482 mm (18.97 inches) • Depth – 822.88 mm (32.39 inches) with bezel 809.04 mm (31.85 inches) without bezel |
|
Embedded NIC
|
2 x 1 GbE LOM card (optional)
|
|
Network options
|
1 x OCP card 3.0 (optional)
Note: The system allows either LOM card or an OCP card or both to be installed in the system. |
|
PCIe
|
Up to three PCIe slots :
• Slot 1 : 1 x16 Gen5 Full height, 3/4 length, Half length or 1 x8/ 1 x16 Gen 5 or 1 x16 Gen 4 Low profile, Half length • Slot 2 : 1 x16 Gen5 Full height, 3/4 length, Half length or 1 x16 Gen 5 or 1 x16 Gen 4 Low profile, Half length • Slot 3 : 1 x8/ 1 x16 Gen 5 or 1 x16 Gen 4 Low profile, Half length |
|
GPU Options
|
Up to 2* x 75 W SW
|
